Reduce your energy bills up to 30% by adding AttiCat Blown-In Pink Fiberglas Insulation to your attic! Fiberglass Insulation works on the principles of trapped air pockets. Millions of tiny air pockets from between the tangled strands of Fiberglas Insulation. These air pockets resist the passage of heat flow throughout the material, reducing heat loss in the winter and heat gain in the summer. Generally, the thicker the insulation, the more air pockets and the higher the R-Value.
The AttiCat Insulation Blowing Machine conditions the AttiCat Expanding Blown-In PINK Fiberglas Insulation by breaking it up and fluffing it, thereby adding millions of tiny air pockets that give the material its insulation power. The insulation is further conditioned throughout the length of the hose. As the AttiCat PINK Fiberglas Insulation bounces its way up to your attic, more and more air pockets are added, increasing its insulation power the entire way!
The insulation performance of all insulation products is measured by common standard: the R-value. R-value measures resistance to heat flow; the higher the R-value, the greater the insulating power. R-value is usually determined by thickness of insulation. The average home in Idaho has 6" (less than R19) of attic insulation, that is less than three times the recommended R-Value for our area. The U.S. Department of Energy recommends 25.5" (R-60) to meet the demands of our extreme weather. With the AttiCat Blown-In Insulation System, you can blow-in insulation as thick as you want to achieve any desired R-value.
Adding AttiCat PINK Fiberglas Insulation to your attic is one of the most effective and affordable ways to reduce heating cost and improve air quality in your home. Call us today to get an estimate on upgrading your attic, improving your health and reducing energy bills! 733-2624
|
|
